Boom drifts or will not hold
Stop the lift. A boom-cylinder seal, control valve or pressure-loss fault needs testing before work resumes.
A crane fault inside a planned but access-controlled site still needs the right entry details before anyone travels.
Share the crane type, visible symptom and exact site location first. It gives the service team more to work with than a message saying only "crane breakdown".
Start Here
Share the sector, gate instructions, crane position and available setup space. These details matter when service access is restricted or the machine is working close to buildings and traffic movement.
If an outrigger, slew limit or warning circuit is involved, do not move the crane to make space until the fault has been assessed.
Send the make, model, rated capacity, warning code and machine identification plate. Add a clear photo or short video, and say whether the fault appeared suddenly or became worse over several shifts.
Common Faults
Start with the symptom. Similar complaints can come from different parts.
Stop the lift. A boom-cylinder seal, control valve or pressure-loss fault needs testing before work resumes.
Check for a visible leak, bent component or interlock warning. Do not level the crane by repeatedly cycling a faulty outrigger.
Note whether the fault is constant or starts after the oil warms up. That detail helps separate an electrical fault from a hydraulic one.
Photograph the warning code and record what the crane was doing when it stopped. Repeated resets can hide the sequence that caused the trip.
Local Pages
Choose the nearest listed city, then share the exact site pin and entry instructions.
Service Request
A clear first message cuts the back-and-forth while the crane is idle.
Do not approve a hydraulic pump, control valve or major electrical part from the symptom alone. Ask what test confirmed the failed component.
Chandigarh are currently listed. Select the city page for local details, or share the exact site location if the machine is outside these city limits.
You can raise a request for Hydra and pick-and-carry cranes, mobile cranes, crawler cranes and tower-crane systems. Send the make, model and rated capacity.
Send the exact location, machine identification plate, fault symptom, warning code and clear photos or a short video. Mention whether the crane is carrying a load or blocking access.
No. Hose, wiring and some control faults may be handled at site. Structural damage, major pump work or parts needing bench tests may require removal after inspection.
Send the machine details, visible symptom and exact site location. Start with diagnosis before approving a major part.
Request Service