Hydraulic oil gets hot and lifting slows
Start with oil level, cooler cleanliness and the return filter. Do not approve a pump from a weak-lift complaint alone.
When lifting slows after the crane warms up, do not jump straight to a pump replacement.
Share the crane type, visible symptom and exact site location first. It gives the service team more to work with than a message saying only "crane breakdown".
Start Here
Chennai, Coimbatore and Madurai sites may involve industrial yards, building projects, road work or coastal exposure. Share the work type and whether the fault is different when the machine is cold.
High operating temperature can expose filter restriction, cooler blockage and internal hydraulic leakage. Pressure and temperature checks should come before a major part is approved.
Send the make, model, rated capacity, warning code and machine identification plate. Add a clear photo or short video, and say whether the fault appeared suddenly or became worse over several shifts.
Common Faults
Start with the symptom. Similar complaints can come from different parts.
Start with oil level, cooler cleanliness and the return filter. Do not approve a pump from a weak-lift complaint alone.
Air entering the suction side, dirty oil or a sticking control valve can cause uneven movement. Stop if the load cannot be controlled smoothly.
Look for wet hose joints and cylinder drift. The repair decision depends on whether pressure is escaping externally or inside the valve or cylinder.
Dust in coolers and connectors can contribute to repeated faults. Share the warning code before cleaning, resetting or changing a sensor.
Local Pages
Choose the nearest listed city, then share the exact site pin and entry instructions.
Service Request
A clear first message cuts the back-and-forth while the crane is idle.
Do not approve a hydraulic pump, control valve or major electrical part from the symptom alone. Ask what test confirmed the failed component.
Chennai, Coimbatore, Madurai are currently listed. Select the city page for local details, or share the exact site location if the machine is outside these city limits.
You can raise a request for Hydra and pick-and-carry cranes, mobile cranes, crawler cranes and tower-crane systems. Send the make, model and rated capacity.
Send the exact location, machine identification plate, fault symptom, warning code and clear photos or a short video. Mention whether the crane is carrying a load or blocking access.
No. Hose, wiring and some control faults may be handled at site. Structural damage, major pump work or parts needing bench tests may require removal after inspection.
Send the machine details, visible symptom and exact site location. Start with diagnosis before approving a major part.
Request Service